|
Home
Rotary Jetting Tools
Jet Drills
Gas Separator
Acoustic Well Stimulation
Pulse Drilling
Seismic-While-Drilling
Coiled Tubing Well Tractor
Water Cannon
Engineering Services
Contact Us
Technical Papers
Links
| |
Motor Gas Separator
  The Tempress gas separator incorporates a turbine-powered rotary
drum centrifuge to bypass gas above a PDM motor.
Fluid flow is ported through the motor.
Without a separator, the combined fluid and gas flow rate are limited by
the equivalent flow capacity of the motor.
Bypassing the gas allows operation of the motor at the design fluid flow
rate. A replaceable gas port in the
separator allows the nitrogen bypass rate to be set independently.
 |
Better cooling and lubrication of the motor
|
|
Longer
motor runs in hot wells
|
|
Fewer trips to replace burned out motors
|
Higher gas flow rates provide:
|
Enhanced well circulation
|
|
Higher velocity in casing |
|
Specifications
|
|
Outside Diameter
|
2.875”
|
|
Length (connected)
|
17.62” (20.00” overall)
|
|
Connections
|
2-3/8” PAC
|
|
Maximum
flow capacity
|
260
gpm (1000 lpm) commingled flow equivalent
|
|
Internal
pressure capacity
|
3000
psi differential (20 MPa)
|
|
Maximum
torque
|
2500
ft-lbf (3400 N-m)
|
|
Maximum overpull
|
50000
lbf (220 kN)
|
|
Pressure loss through tool
|
70 psi (0.5 MPa)
|
|
Temperature (maximum)
|
400° F (200° C)
|
|
Fluid compatibility
|
Clear fluids: water, 1%
acid, 3% KCl, scale dissolvers, frac oil
|
|
Gas compatibility
|
Nitrogen or air
|
View
Gas
Separator Laboratory Visualization (6 MB wmv)
Motor
Gas Separator Running on Coil (10 MB wmv)
Download
Brochure Motor Gas Separator.pdf
|
